SaniFlo SaniAccess 3 Toilet Review [2021 Update] – Toiletable

The SaniFlo SaniAccess 3 is a modern and high-efficiency toilet with some fantastic and innovative features. This two-piece toilet comes with a unique flushing system this is powerful and does its job well.

Additionally, this flushing system consumes minimum amount of water, a lot less than most conventional toilets. It features an elongated bowl that provides maximum comfort by offering more space for your legs. In addition to that, you can also use it to separate gray water from other sanitary products such as bathtubs and showers.

Let’s have a further look at the features of this toilet.

SaniFlo SaniAccess 3 Review

Design

This unique, two-piece toilet is made from high-standard porcelain, which is known for its quality and durability in the industry. The macerator tank is also constructed from the same material. Porcelain is sturdy and easy to clean, which makes it ideal for such a unique and high-standard toilet. Additionally, this toilet features an oval bowl for the superior comfort of the users by providing them more room for sitting and ensuring a relaxing experience.

Flushing system

The SaniAccess uses a unique flushing system that consumes a lot less water than most traditional toilets. Its flushing system works in a unique way that gets rid of the waste in about 10-12 seconds. When you activate the flush valve, the water flows into this toilet and activates a micro switch in the pressure chamber, which causes the motor to start. This motor is sealed permanently inside an oil-filled container and it the macerator blades begin to rotate at a speed of 3600 rotation per minute.

Then, the macerator blades turn the water and organic waste slurry, and it causes them to eject the solid waste through a grill and into a container. In this container, the waste is picked up by impeller pump that is located under the motor, and it pumps the effluent upwards horizontally.

Once the water level goes down, the micro switch deactivates automatically until the flush valve is activated again. This entire procedure takes about 10-12 seconds. In addition to that, the SaniAccess 3 also discharges greywater from a variety of other sanitary products, for instance, bathtubs, urinals, and showers.

Cleaning

The SaniAccess 3 is pretty easy to clean because of its porcelain construction. You will need a standard gentle cleaner, some wipes, and a brush to scrub the toilet. However, the macerator tank isn’t that easy when it comes to cleaning it. You have to be careful with its cleaning so that you don’t misplace its parts. In addition to that, you can also purchase its optional hard water cleaning system, which makes flushing a bit easier.

Installation

About the installation of the toilet, you might need a professional plumber unless you know a thing or about plumbing. You will need to follow the instruction manual to make sure that everything is connected correctly. For instance, you don’t have to join this toilet to a water supply. In addition to that, the macerator should be connected to a power supply because it works on electricity.

Overall Rating 4.5/5

To conclude the SaniFlo SaniAccess 3 review, this toilet is cost-effective and water-efficient. However, its flushing system is a bit unique, and its installation is a little tricky. Therefore, you will need a professional plumber for its installation to make sure that everything is in the right place.