A cloggy toilet could be the most frustrating thing in any household. However, a weak flushing toilet can lead to a slow, stinky, disaster that is a lot worse. Most toilets consist of a storage tank with a flapper that raises when you flush the toilet. As the flapper raises, it releases water into the bowl and then down the drain.
Table of Contents
Sometimes low water in the tank can cause a weak flushing toilet, whereas the other times clogged holes around the rim can also lead to a weak flush performance. Either way, there are some quick tips that you can follow to get rid of this problem and boost the flushing power of your toilet.
Why is a Powerful Flush Important?
A powerful flush is necessary to keep your toilet clean because a strong flush gets the waste down in one go and stops it from coming back up. In addition to that, this saves you from having to flush the toilet multiple times. Toilets that require multiple flushes are considered a weak and less desirable choice. Similarly, the stronger the flush, the cleaner the toilet bowl is. Therefore, the cleanliness of the toilet bowl mostly depends on how powerful the flush is.
Tips to Make a Toilet Flush Stronger
Here are 5 ideas to make a toilet flush stronger.
1. Test for Clogs
Testing for toilet clogs is the first step in your inspection process to making your toilet flush stronger. If your toilet is older, the first thing that you need to do is make sure that it is not clogged. Similarly, the build-up of shaving creams and toothpaste over the years can also cause the toilet to clog partially, which can affect the flushing performance.
All these things don’t clog the toilet entirely, so you need to clean the waste build-up that is sticking to the pipes. You can do this by pouring a gallon of water inside the bowl, and if the water struggles to flush, it means that the toilet is partially clogged. For this purpose, use a plunger or snake to clear the pipes.
Some people also use vinegar to improve the flushing efficiency of a toilet. A vinegar soak is a lot more proactive and effective than checking for clogs. First, open the lid of the tank and remove the fill hose that varies by toilet models. Now, put a funnel inside the overflow tube carefully, and fill it with vinegar.
Leave it for a couple of hours, and put everything back the way it was and then flush the toilet. You will notice a significant difference in flushing power. In addition to that, it will quickly and gently remove the build-up in your toilet and pipes.
3. Reset Your Water Level
Toilets flush by releasing water from their tanks into the toilet bowls. As soon as the toilet flushes, it needs a refill. The tank knows as the floating rubber device drops below a fill line, it is going to need a refill. Therefore it keeps filling the tank until the floating rubber reaches the fill line again.
Now, what you need to do is open the tank and locate the float and the fill line. Activate the flush while keeping the lid open and watch the water release into the toilet bowl and then fill back up. Check if the tube stops refilling before the float reaches the fill line, it means that the toilet won’t perform a fully efficient flush. Adjusting the float is pretty easy; you have to position it to connect it to the refill tube. Now, flush again and see if it is working correctly.
4. Clean the Rim
Water enters the toilet bowl through several jet holes that are located around the upper rim. These jets control the pressure and the flow of water as it flows into the bowl; it also creates a centrifugal force required to boost the efficiency of the flush.
Over time, these jets tend to build up dirt and waste, which leads to partial clogging of these jets, making it harder for water to flow effectively. Similarly, some of the water struggles to clear up the blockage inside the jets, which is why you get a weaker flush.
Locate the jets under the rim. You will quickly notice clogging and build-up of several things around the nozzles. To clear this up, use a heavily watered-down bleach or a vinegar solution and use it with an old toothbrush or wire to scrub away the blockage and obstruction on the nozzles. Lastly, when you are finished clean the toilet thoroughly with bleach or a standard toilet bowl cleaner.
5. Switch Toilet Models
However, if nothing seems to work and increase the flushing power of the toilet, you can also consider buying a new toilet that is designed in a modern way. Pressure assist toilets consist of bladders that hold water under pressure. However, these toilets are more expensive than most traditional toilets but have a strong flushing performance.
Furthermore, vacuum-assisted toilets contain plastic tanks that generate suction action in the tank as the water releases while sucking the waste out of the bowl. Either way, these toilets have a lot more flushing power than conventional toilets.
In addition to that, you can also replace the pipes that connect to the toilet if nothing else works. If the pipes get old and you haven’t replaced them in a long time, it can also lead to a slower flushing performance. However, it is easier to detect old pipes when you are installing a new unit. Changing the pipes is a small change, but it can make a huge difference.
In conclusion, a few tips and tricks can help you get rid of the weak flushing performance of a toilet and make your toilet flush better. To perform these simple procedures, you won’t need a professional! A few adjustments here and there can make a huge difference and increase your toilet’s flushing performance. Keeping these ideas in mind will prolong the life of your toilet and maintain its performance top-notch.